Resources

2026-11-20

Aluminum Window Glazing RFQ: Confirm the Glass Build-Up and Profile Fit

A CIMU buyer guide to specifying glass make-up, window sections, performance evidence and supply scope before comparing aluminium window quotations.

Editorial graphic of a CT120 aluminium sliding-window glazing section from a product brochure, with a buyer reminder to confirm glass and frame compatibility; illustrative only

Short answer: do not specify an aluminum window by a glass label or profile rendering alone. A useful RFQ names the proposed glazing build-up, identifies the exact window system and opening, and asks who will confirm that the glass, edge details, gaskets and frame are compatible in the approved configuration. The project designer should define local code and performance requirements; the supplier should confirm the selected system's available options and evidence.

Start with an opening-by-opening glass schedule

Give each opening an ID, location, width, height and operating type. State the intended glass make-up for each group of openings: pane sequence, nominal thickness of each pane, any interlayer or cavity, coatings, appearance and any required safety treatment. If the final construction is undecided, mark it as a design question rather than allowing bidders to assume different glass. CIMU's FAQ lists single, insulating, laminated and Low-E options as project-dependent possibilities; availability for a particular system and order still needs confirmation.

Ask for the frame and glazing section together

A window profile image does not prove which glazing build-ups a finished window can accept. Request a section for the proposed system and glass option showing how the glass sits in the sash or fixed frame, the glazing bead and gasket arrangement, and the relevant edge dimensions. For Aluminum Window & Door Profiles or aluminum profile extrusions supplied to a fabricator, make clear who checks the glazing pocket and sources the remaining components. For a complete unit, ask the bidder to identify the approved glazing and component schedule. The CT120 illustration on this page is a product brochure rendering, not an approved section for a specific order.

Separate performance targets from unverified numbers

If thermal, solar, acoustic, wind or impact performance matters, name the project location, governing requirement and required evidence. A center-of-glass value cannot stand in for an evaluated whole-window configuration. The National Fenestration Rating Council describes whole-product energy ratings; do not transfer another size, glass package or frame configuration's result to this order without checking its scope. Local safety-glazing decisions belong in the project specification and code review, not in a social-media image.

Define who supplies and approves each part

Ask whether the quote covers Aluminum Extrusions only, fabricated frames, glazing supply, sealed units, gaskets, setting materials, installation and the wall interface. Record who signs off the final glass schedule and shop drawings. If the glass is purchased separately, the fabricator, glazing supplier and window-system provider need a common approved section and revision. Otherwise similar-looking prices may leave different responsibilities unpriced.

Request a comparable CIMU review

CIMU's Windows catalogue includes CT120 sliding and several casement systems. The right choice depends on the opening, movement, approved system limits and project brief; a brochure drawing should start questions, not settle them. Use the site's Products navigation to view the window families, then Contact to send the project location, opening schedule, dimensions, quantities, drawings, proposed glass make-up, performance targets, finish, supply boundary and destination port. CIMU describes its role as an aluminium window and door system provider that coordinates configuration and export. Final specifications and commitments belong to approved drawings and contract terms.

Image note: The cover is an editorial composition using a customer-supplied CT120 brochure rendering. It illustrates a glazing interface, not a completed project, tested assembly or proof that a proposed glass build-up is approved.

Sources: CIMU Windows catalogue, https://cimualu.com/products/windows/ ; CIMU FAQ, https://cimualu.com/faq/ ; National Fenestration Rating Council, https://nfrc.org/

Frequently asked questions

Is a glass type name enough for an aluminum window quote?

No. Identify the opening, proposed pane sequence, nominal thicknesses, coatings and safety requirements, then ask for the approved system and glazing section.

Can I use a glass-only energy value to compare complete windows?

Do not treat a glass-only value as a whole-window result. Ask for evidence matching the proposed frame, glazing configuration, rating method and project requirement.

Who confirms the glass will fit the selected profile?

The approved system drawings and component schedule should identify the glazing interface and who is responsible for checking compatibility. Record the fabricator, glazing supplier and system provider roles in the RFQ.

What should I send CIMU for a glazing review?

Send project location, opening schedule, sizes, quantities, drawings, proposed glass build-up, performance targets, finish, supply scope and destination port.

Discuss your project